Vertical and Horizontal Exhaust Gas Heat Exchangers for Exhaust Heat Recovery, Combined Heat and Power (CHP) and Cogeneration Systems.

PDF Documents

M SERIES CHAMBER SILENCERS

Maxim M Series Chamber silencers provide the best noise control across the entire audible range. The basic design incorporates non-resonant side tube arrangements to permit passage of the exhaust gases from one chamber to another. This creates a reversal of flow and develops a predictable amount of back pressure. Another important feature of chamber type silencers is the availability of side inlet exhaust connections. These units can also have side outlet exhaust connections. These side connections, while having little effect on the pressure drop, will in many instances greatly facilitate installation of the silencer by eliminating the need for elbows in the exhaust piping.

M11 Industrial grade, 15 to 20 dBA expected attenuation
M22 Residential grade, 20 to 25 dBA expected attenuation
M32 Critical grade, 25 to 32 dBA expected attenuation
M42 Super Critical grade, 30 to 38 dBA expected attenuation
M52 Hospital grade, 35 to 42 dBA expected attenuation
M62 Hospital Plus grade, 35 to 50 dBA expected attenuation
M72 Extreme grade, 40 to 55 dBA expected attenuation
M82 Super Extreme grade, 45 to 60 dBA expected attenuation

Download

MSA SERIES SPARK ARRESTING CHAMBER SILENCERS

Maxim MSA Series Spark arresting chamber silencers. Spark arresting applications include marine service, refineries and other hazardous environments. These units have chamber type designs. The retention of hot carbon and soot particles minimizes danger and helps provide a cleaner area and atmosphere.

MSA10 Industrial grade, 12 to 20 dBA expected attenuation
MSA11 Residential grade, 20 to 25 dBA expected attenuation
MSA22 Critical grade, 25 to 32 dBA expected attenuation
MSA33 Super Critical grade, 30 to 38 dBA expected attenuation
MSA44 Hospital grader, 35 to 42 dBA expected attenuation
MSA55 Hospital Plus grade, 35 to 50 dBA expected attenuation

Download

MT SERIES LOW-PRESSURE DROP/TURBO SILENCERS

Maxim MT Series Low Pressure/Straight through silencers have an unobstructed passage through the silencer with no flow reversal. The result is a pressure drop across the silencer only slightly above that caused by an equivalent length of pipe. Side connections are not practical in this design due to an increase in pressure drop and price. Noise attenuation provided by straight through design is less than that provided by chamber design silencers incorporating a flow reversal. As a result, the MT series is best used in applications where a low-pressure drop is a primary consideration.

MT22 13 to 16 dBA expected attenuation
MT32 16 to 19 dBA expected attenuation
MT42 19 to 22 dBA expected attenuation
MT52 23 to 25 dBA expected attenuation

Download

Maxim QAC Quick-Access series

The Maxim QAC Quick-Access series of catalytic silencers is the ultimate solution for natural gas internal combustion engine emission control in any environment. Easy to install and simple to maintain and operate, QAC silencers are designed to work efficiently and economically over a long, trouble-free lifespan. We offer the flexibility and performance needed to efficiently meet your specific requirements, plus innovative features that are only available from Maxim.

Download

CONTACT US

TO REQUEST INFORMATION OR A PROPOSAL

    116 Bridge Avenue E Delano, MN 55328

    Phone: (763) 972-9129